Shuttle PC63J 500W Power Supply The Shuttle XPC Accessory PC63J is a new high-end power supply with a maximum output wattage of 500W suitable for XPCs with 'J' series cases. With a low noise level of only 30dB, it is ideal for use in any noise-sensitive environments such as a library and offices. Thanks to its 80 PLUS Bronze certification for power-efficient devices, this power supply is also suitable for ENERGY STAR® compliant systems. Benefit from less power consumption and less energy costs using PC63J. $99.99 $85.99

More Info

Upgrade the power supply in the SG41J1, SH55J2 and SH67H3 models to accommodate higher end graphics cards.

Use the Power Supply Calculator to determine your power needs.

Specifications:

Input:

• Input Voltage: 100~240V AC
• Input Current: 8A / 4A (115/230V AC)
• Frequency: 60~50 Hz
• Active PFC (Power Factor Correction)


Output:

• Total combined output (3.3/5/12V): 500W
• Total combined output (3.3/5V): 130W
• Max. Current: +12V1: 16A / +12V2: 16A / +12V3: 17A / +3.3V: 18A / +5V: 16A / +5VSB: 2.5A (Standby) / -12V: 0.3A
• Hold up time: >17ms (full load, 115V AC)
• +12V Rise time: <20ms (full load, 115V AC)
• Protection: OTP/OPP/UVP/OCP/SCP/OVP


Energy Efficient:

• 80PLUS Bronze compliant: the PSU provides at least 82/85/82% efficiency at 20/50/100% load. aligns to the power supply requirements of Energy Star 4.0


Connectors:

• Mainboard ATX 4+4 pin (12V) + 20 pin
• 3x S-ATA, 2x Molex, 1x FDD, PCIe 6+6+2
• Cable length designed for the XPC


Environmental:

• Operating Temperature: 10~50°C
• Storage Temperature: -40~70°C
• MTBF: >100.000 hours (75% load, 25°C)
• Noise: <30dB at 50cm for 200W Load


Compatibility:

• Supported Shuttle XPC models: SG41J1, SH55J2, SX58J3